TM 5-3800-205-23-1
TESTS, INSPECTIONS, AND ADJUSTMENTS - CONTINUED
0005 00
STEERING WHEEL SLIP CHECK
1.
Equipment Condition. Bowl/water tank empty (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
2.
Steering Wheel Slip Check.
a.
Start engine (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
b.
Move machine to a flat, hard surface.
c.
Raise bowl/water tank and release brakes (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
d.
Turn steering wheel right until stops hit. Turn steering wheel left until stops hit.
e.
Count rotations of steering wheel. Repeat procedure for right turn. Steering wheel rotations for a turn must not
exceed three full rotations. If number of rotations exceeds three full rotations, steering slip is excessive and steer-
ing system requires troubleshooting (WP 0006 00).
MAIN CONTROL VALVE TEST AND ADJUSTMENT
1.
Tools and Special Tools.
a.
Tool kit, general mechanic's (Item 33, WP 0172 00)
b.
Tool outfit, hydraulic systems (HSTRU) (Item 35, WP 0172 00).
2.
Materials/Parts.
a.
Oil, lubricating (Item 24 or 29, WP 0171 00).
b.
O-ring.
3.
Equipment Condition.
a.
Bowl/water tank empty (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
b.
Bowl/water tank lowered (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
c.
Engine OFF (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
0005 00-20
