TM 5-3800-205-23-1
UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0010 00
Table 1. Unit Preventive Maintenance Checks and
Services (PMCS) for 613CS Scraper - Continued.
LOCATION
ITEM TO
ITEM
MAN-
NOT FULLY MISSION
CHECK/
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
SERVICE
12
Semiannual
Draft Arm
a. Check clearance between draft arm
Wear Plates
shim and scraper bowl on each side
of bowl. Clearance should be 0.118
+/- 0.080 in. (3 +/- 2 mm).
b. If clearance is greater than 0.198 in.
(5 mm), add shim(s).
DRAFT ARM
SHIM
SCRAPER
BOWL
Open engine access door and access
13
Semiannual
Engine
engine crankcase breather assembly
on left side of engine compartment.
Breather
Clean breather:
Assembly
a. Loosen clamp and remove hose
from cover of breather.
b. Remove bolt, washer, cover, and
breather element.
c. Inspect cover seal for damage.
Replace seal if damaged.
0010 00-13
