TM 5-3800-205-23-1
KEY START SWITCH REPLACEMENT - CONTINUED
0043 00
REMOVAL - CONTINUED
NOTE
Tag all wires to aid in installation.
4.
Disconnect cable connector (10) from switch connector (11).
5.
Remove screw (7), lockwasher (8), wires, and ground cable (9) from key start switch (5). Discard lockwasher.
10,11
5
7,8,9
INSTALLATION
NOTE
When installing wire leads, insert leads between screw and lockwasher.
1.
Install wires and ground cable (9) on key start switch (5) with new lockwasher (8) and screw (7).
2.
Connect cable connector (10) to switch connector (11).
3.
Position key start switch (5) through back of switch panel (4) and install bezel nut (1).
4.
Install six screws (2) and two brackets (3) on switch panel (4).
5.
Insert key (6) in key start switch (5).
0043 00-2
