TM 5-3800-205-23-1
PARKING BRAKE AND EMERGENCY BRAKE PRESSURE SWITCHES
REPLACEMENT- CONTINUED
0047 00
REMOVAL - CONTINUED
6.
Disconnect pressure switch connector (11) from harness connector (12).
7.
Remove switch (10) from valve (6).
10
11
6
12
INSTALLATION
1.
Apply antiseizing tape to threads of switch (10).
2.
Install switch (10) in valve (6).
3.
Connect pressure switch connector (11) to harness connector (12).
4.
Position valves (6) through panel (9). Secure panel with four screws (7) and washers (8).
0047 00-3
