TM 5-3800-205-23-1
PARKING LIGHT/BLACKOUT MARKER LIGHT MAINTENANCE - CONTINUED
0050 00
BLACKOUT MARKER LENS REMOVAL - CONTINUED
NOTE
Packing should be replaced if there is evidence of moisture inside housing.
3.
Remove packing (12) from cover (10). Inspect pack-
12
10
ing for tears or damage. If torn or damaged, replace
packing.
4.
Turn cover (10) over and remove two screws (13) and
retainer (14) from cover.
5.
Remove marker lens (15) from cover (10).
13
14
15
BLACKOUT MARKER LENS INSTALLATION
1.
Position marker lens (15) in cover (10) and install retainer (14) with two screws (13).
2.
Install packing (12) in cover (10).
3.
Position cover (10) on housing (9).
4.
Install two bottom screws (11).
5.
Tighten three screws (8).
0050 00-3
