TM 5-3800-205-23-1
BATTERY AND BATTERY CABLES MAINTENANCE - CONTINUED
0067 00
BATTERIES INSTALLATION - CONTINUED
WARNING
Remove all jewelry such as rings, ID tags, watches, and bracelets when working around batteries. If
jewelry or a tool contacts a battery terminal, a direct short may result, causing instant heating and elec-
tric shock at the point of short circuit. Damage to equipment and injury to personnel could result.
Cover battery posts with a clean, dry rag to protect against electric shock.
CAUTION
Connect battery cables in sequence as described in steps 4 through 6.
4.
Install cable clamp (4) on terminal (6) and tighten nut (3).
5.
Install protective cover (2) over cable clamp (4).
6.
Repeat steps 4 and 5 for terminals (8, 7, and 5).
7.
Close compartment access door (1).
2
5
1
3,4,6
7
8
390-996
0067 00-6
