TM 5-3800-205-23-1
DIRECTION CONTROL AND HYDRAULIC CONTROL LEVERS REPLACEMENT - CONTINUED
0114 00
HYDRAULIC CONTROL LEVERS REMOVAL - CONTINUED
2.
Remove eight screws (20) and washers (21) from mounting plate (22) and protective boot (23). Inspect boot for damage
or tears. Replace boot if required.
20,21
22
23
3.
Open engine access door (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
NOTE
Note position of harness clamps to aid in installation.
4.
Remove six screws (11), washers (12), two harness clamps (13), and access panel (14).
13
11,12
14
0114 00-8
