TM 5-3800-205-23-1
HYDRAULIC AND STEERING PUMP REPLACEMENT - CONTINUED
0158 00
INSTALLATION
NOTE
Lightly coat all new O-rings with clean oil before installation.
1.
Install new O-ring (42) on hydraulic and steering pump (27).
WARNING
Use extreme care when handling heavy parts. Provide adequate support and use assistance during procedure.
Failure to follow this warning may result in death or injury to personnel.
NOTE
Hydraulic and steering pump weighs 50 lb (22 kg).
2.
With assistance, install hydraulic and steering pump (27) on torque converter (41) with two washers (40) and bolts (39).
3.
Position hose (36) and new O-ring (37) to hydraulic and steering pump (27) and install two half flanges (38) with four
washers and bolts (35).
4.
Position tube (32) on hose (34) and tighten four hose
32
clamps (33).
33
33
34
5.
Position tube (28) and new O-ring (29) on hydraulic
27
and steering pump (27) and install two half flanges
(31) with four washers and bolts (30).
31
30
28,29
0158 00-7