TM 5-3805-248-23-2
ENGINE OIL COOLER REPLACEMENT - CONTINUED
0269 00
REMOVAL
1.
Remove two bolts (1 and 2) and gasket (3). Discard gasket.
2.
Remove clamp (4).
CAUTION
Wipe area clean around all connections prior to removal. Cap hydraulic oil lines and plug openings after
removal. Contamination of hydraulic system could result in premature failure.
NOTE
Tag hose and tube assemblies prior to removal to ensure correct installation.
3.
Disconnect hose assembly (5) from cock (6).
4.
Remove cock (6), elbow (7) and bushing (8).
5.
Disconnect hose assembly (9) from connector (10).
6.
Remove connector (10).
1
2
5
3
4
10
6
394-661
9
8
7
0269 00-2
