TM 5-3805-248-23-2
HYDRAULIC STEERING SERVO-SENDER CYLINDER REPAIR - CONTINUED
0309 00
ASSEMBLY
1.
Install two new preformed packings (36) and plugs (35) in cylinder (37). Torque plugs to 9 lb-ft (12 Nm).
2.
Install one of two rings (32) in head (34).
32
3.
Use pipe and hammer to install bearing (33) until it is
against one of two rings (32).
4.
Install remaining ring (32).
33
5.
Install new preformed packing (31).
31
6.
Use clean oil to lubricate new preformed packing (31).
34
32
394-947
7.
Install head assembly on cylinder assembly.
CYLINDER
ASSEMBLY
8.
Install four bolts (30) in head assembly.
HEAD
ASSEMBLY
30
394-946
9.
Install one of two rings (28) in rod (15).
28
10.
Use pipe and hammer to install bearing (29) until it is
against one of two rings (28).
29
11.
Install remaining ring (28).
15
28
394-945
0309 00-7
