TM 5-3805-248-23-2
AIR COMPRESSOR REPAIR - CONTINUED
0377 00
ASSEMBLY - CONTINUED
41.
Install new gasket (16) and adapter (15) on cylinder
10
8
18
head (4) with two lockwashers (14) and bolts (13).
9
11
42.
Install two new springs (12) in unloader ports on cyl-
17
inder head (4).
43.
Apply a coat of silicone grease provided in repair kit
12
to two new unloading valves (11) and install valves in
13
cylinder head (4). Apply 1/2 in. ball of silicone grease
to end of unloading valves.
14
44.
Apply a coat of silicone grease provided with repair
15
kit to two new seals (10). Install seals on unloading
16
valves (11).
45.
Install new gasket (17) and cover (18) on cylinder
head (4) with two new lockwashers (9) and bolts (8).
Torque bolts to 105 lb-in. (12 Nm).
4
394-1500
46.
Align match-marks and install new gasket (5) and cyl-
2
inder head (4) on cylinder block (6) with washer (1),
bolt (2) and five bolts (3).
1
47.
Torque bolt (2) and five bolts (3) in numbered
3
sequence to 22 lb-ft (30 Nm). Torque bolts again to 33
lb-ft (45 Nm).
4
5
6
394-1399
48.
Install air compressor (WP 0167 00).
49.
Operate engine until normal operating pressures are reached (TM 5-3805-248-10).
END OF WORK PACKAGE
0377 00-12
