TM 5-3805-248-23-2
SCRAPER CONTROL VALVE REPAIR - CONTINUED
0381 00
ASSEMBLY - CONTINUED
29.
Install new preformed packing (37) on scraper control
valve.
36
NOTE
39
Apply a thin coat of clean engine oil to
38
stem and housing assembly.
37
30.
Lubricate and install stem (36) and housing assembly
(39).
31.
Install two bolts (38).
394-1419
NOTE
Position seal with lip toward threaded end of body.
32.
Use driver to install new seal (35) in body (24), mak-
ing contact with bottom of counterbore.
DRIVER
35
24
394-1428
0381 00-12
