TM 5-3805-260-10
WARNING
Muffler and guard may be hot.
(18) Remove the muffler guard beneath frame,
inside right front wheel. Store muffler guard on
front of ejector.
(19) Remove muffler and store next t to muffler
guard on ejector.
NOTE
Weight distribution is now complete, proceed
with slinging.
PREPARATION FOR OPERATION AFTER HELICOPTER TRANSPORT
a.
Preparation for Reconnection. The following eleven procedures are necessary to make the tractor operational.
CAUTION
Do not run the engine without the muffler
installed.
CAUTION
Engine must not be run without the air cleaner
assembly securely in place on the air inlet.
(1)
Remove transmission skid assembly from
inside bowl and install on rear of tractor.
WARNING
Hood weighs 181 lbs. (82 Kgs).
(2)
Remove the engine hood from the rear frame
and relocate pivot assembly on top of hood. Attach
hood to hanger brackets on the tractor, secure the
safety cables and attach the hood springs.
NOTE
When securing the safety cables, be sure the
middle loop of each cable is on the outside.
3-29
