TM 5-3805-260-24
FUEL FILTER BASE
(1)
Put 9S3263 Thread Lock Compound on the
threads of the tapered end of the stud
to a distance of ...................30 in (7 6 mm)
(2)
Sealing surface of stud.
NOTE Do not damage this surface
(3)
Torque for stud ...................50 10 lb ft (70 14 N-m)
(4)
Distance from sealing surface of base
to end of stud......................97 05 in (24 61 3 mm)
AUTOMATIC TIMING ADVANCE UNIT
End play between washer (2) and
timing advance unit (1) ...............003 to 037 in (O 08 to O 94 mm)
(3)
Torque for screw.................72 5 lb In (8 2 0.6 N m)
"Stake" (make a mark with a punch) screw (3) in two places
DRIVE GEAR FOR THE INJECTION PUMP
(1)
Torque for the bolt that holds the
drive gear to the camshaft of the
injection pump ....................110 10 lb ft. (149 14 N.m)
1-10
