TM 5-3805-260-24
AIR DRYER (613BSNS1, 613BSS1)
23.
Install a new plate (16) with the cloth side towards
the desiccant (17).
24.
Make sure the shoulder (23) on the bolt is above the
plate. Use a soft hammer to hit the side of the cartridge
shell to
make the desiccant go down (settle).
25.
Put the spring (15), seat (14) and rebuilt desiccant sealing
plate (8) over the bolt.
26.
Put the nut (9) on the bolt and tighten it several turns. To
make the desiccant go into place (settle into place), hit
the side of the cartridge shell several times with a soft
hammer.
27.
Put some of the lubricant from the repair kit on the
seals (13).
3-256
