TM 5-3805-260-24BRAKE AND AXLE GROUP(1) Torque for plug 45 5 lb. ft. (61 7 N m)(2), (4) Torque for bolts 225 25 lb. ft. (306 34 N m)(3) Torque for plug . 35 5 lb. ft. (48 7 N m)(5) Torque for bolts 195 20 lb. ft. (265 27 N m)WHEEL AND BRAKE GROUP (SCRAPER)Adjustment Procedure for Wheel Bearings:1. Fasten a rope to the studs for nuts (2) with at least two full wraps aroundthe outside circumference.2. Fasten a spring scale to the free end of the rope3. While the wheel is turned, tighten nut (4) until a pull of 5 lbs. (2.3 kg)is the indication on the scale.4. Install the lock, and outer nut (5).5. While cover (8) is removed, hit the end of shaft (10) with a hammer untilbolts (6) cannot be tightened to more than 200 to 220 lb. ft. (272 to 299 Nm)6. Install shims (9) to have dimension (A) of .125 in. (3.17 mm) minimumbetween plate (7) and end of shaft (10).1-51/(1-52 Blank)
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business