SERVICE UPON RECEIPT
Tools and Special Tools
Construction Equipment Repairer, 91L
Tool Kit, General Mechanic's: Automotive
DA Form 2407
DA PAM 750-8
Cleaning Compound, Solvent
DD Form 314
DD Form 1397
Gloves, Chemical and Oil Protective
When a new, used, or reconditioned M9 ACE is received, determine whether it has been properly prepared for
service and is capable of performing its mission. Follow the Preventive Maintenance Checks and Service (PMCS)
Refer to DD Form 1397 for procedures on unpacking the M9 ACE.
Remove all straps, plywood, tape, seals, and wrappings.
Cleaning solvent is combustible. Wear protective goggles and gloves; use only in a well-
ventilated area; avoid contact with skin, eyes, and clothes; and do not breathe vapors. Keep
away from heat or flame. Never smoke when using cleaning solvent; the flashpoint is 144°F
(62°C). Failure to follow this warning may result in injury or death to personnel. A fire
extinguisher will be kept nearby when the solvent is used.
Remove rust preventive compound from coated exterior parts of the HBF-TT using cleaning solvent and rags.
Inspect the M9 ACE for any damage incurred during shipment. Check also to see if the equipment has been
Check the equipment against the packing list to ensure that the shipment is complete. Report any discrepancies
in accordance with instructions in DA PAM 750-8.
END OF TASK