TM 5-3800-205-10-1
TROUBLESHOOTING PROCEDURES - CONTINUED
0012 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL SYSTEM - CONTINUED
3. Check for loose electrical
3. Reconnect electrical connect-
connectors.
tors if required. If problem still
exists, notify Unit Mainten-
ance.
14. Windshield Wiper Not Working.
1. Check for blown fuse at fuse/
1. If fuse is bad, request a
circuit breaker panel in cab.
replacement fuse from Unit
Maintenance. If fuse is good,
and problem still exists, go to
test step 2.
2. Check for loose electrical
2. Reconnect electrical connec-
connectors.
tors if required. If problem still
exists, notify Unit Mainten-
ance.
ENGINE
1.
Engine Cranks But Fails to Start
1. Check fuel tank gage with key
1. If indication is empty, add fuel
(Operating Temperature Above 32F
start switch on.
(0C).
Maintenance if gage is
inoperative. Go to test step 2 if
gage is okay.
2. Check for blown fuel pump
2. If fuse is bad, request a
fuse at fuse/circuit breaker
replacement fuse from Unit
panel in cab.
Maintenance. If fuse is good,
go to test step 3.
3. Check that fuel shutoff
3. Open fuel shutoff valve(s) as
valve(s) located on fuel tank
required. If problem still
are fully OPEN.
exists, go to test step 4.