RAIL TRANSPORT - CONTINUED
CONFIGURE MACHINE FOR RAIL TRANSPORT - CONTINUED
Remove bolt and washer from pin.
To relieve tension on hangers, ejector can be moved slightly forward.
Another means to relieve tension on hangers is to attach a come-along (load binder) between one
scraper bowl lifting eye and elevator drive cross shaft.
To assist in removing pins, work on both sides of scraper bowl at the same time.
Remove pin from each side of bowl, by driving pin out.
Lift each hanger free of bowl and remove from elevator shaft. Reinstall mounting hardware on hangers.
Stow hangers in BII toolbox on rear deck of scraper.