RAIL TRANSPORT - CONTINUED
CONFIGURE MACHINE FOR RAIL TRANSPORT - CONTINUED
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury
Some oil will spill as hydraulic motor is removed. Oil is very slippery. Ensure all spills are cleaned up.
Failure to do so may cause injury to personnel.
Hydraulic motor weighs approximately 85 lb (39 kg).
Attach a suitable overhead lifting device to elevator motor. Take up slack in sling.
Remove two bolts, washers, and elevator motor from speed reducer.