RAIL TRANSPORT - CONTINUED
CONFIGURE MACHINE FOR RAIL TRANSPORT - CONTINUED
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure any lifting device used is in good condition and of suitable lift capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in death or injury to person-
ROPS/FOPS weighs 447 lb (203 kg).
OCONUS ONLY: Remove ROPS/FOPS and set aside for stowage in ISU-60 container:
Attach a suitable overhead lifting device to three lift points on top of ROPS/FOPS. Take up slack in slings.
Remove 16 nuts, 32 washers, and 16 bolts from four corners of ROPS/FOPS.
Lift ROPS/FOPS free of cab corner posts and lower to the ground.
Stow mounting hardware in BII toolbox on rear deck of scraper.
CAB CORNER POST