RAIL TRANSPORT - CONTINUED
CONFIGURE MACHINE FOR RAIL TRANSPORT - CONTINUED
Remove locknut, washer, and two plastic bushings. Separate arm from arm mount on each side of windshield and
AND TWO PLASTIC
Reinstall bolts, washers, and nuts to windshield hinge. Reinstall two plastic bushings, washer, and locknut on each
Stow windshield in ISU-60 container:
Open single-door end of container.
Remove two roller ramps from right-side wall of container.
Install each ramp at door opening, with two pins through each ramp into holes in edge of container floor.