TM 5-3800-205-23-1
TROUBLESHOOTING PROCEDURES - CONTINUED
0007 00
Table 8. Steering System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. Machine Turns Slowly in Both Directions -
b. If problem still exists, go to
Continued.
test step 3.
a. If spool does not center
3. Check that main control spool
correctly or if any damage is
in steering control valve is
found,
notify
DS
centered and that there is no
Maintenance to replace
damage to spool.
steering control valve.
b. If problem still exists, go to
test step 4.
4. Perform Steering System
a. If low output pressure is
Pressure Test (WP 0005 00).
indicated,
notify
DS
Maintenance to replace
steering control valve.
b. If problem still exists, go to
test step 5.
5. Check for leakage at steering
a. If any leakage is found, notify
control valve.
DS Maintenance to replace
steering control valve.
b. If problem still exists, go to
test step 6.
6. Check valve seat in ball check
a. If any damage to valve seat is
valve for damage.
found,
notify
DS
Maintenance to replace
steering control valve.
b. If problem still exists, notify
DS Maintenance to replace
steering vane pump.