TM 5-3800-205-23-1
SECONDARY FUEL FILTERS AND BASE REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Equipment Condition
Maintenance Level
Unit
Machine parked on hard, level surface (TM 5-3800-
205-10-1 or TM 5-3800-205-10-2)
Tools and Special Tools
Scraper bowl or water tank lowered to ground (TM
Tool kit, general mechanic's (Item 33, WP 0172
5-3800-205-10-1 or TM 5-3800-205-10-2)
Parking brake applied (TM 5-3800-205-10-1 or TM
Shop equipment, common no. 1 (Item 24, WP
5-3800-205-10-2)
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
Materials/Parts
3800-205-10-2)
Battery disconnect switch in OFF position (TM 5-
3800-205-10-1 or TM 5-3800-205-10-2)
Fuel line quick disconnect disconnected at draft
arm (TM 5-3800-205-10-1 or TM 5-3800-205-
10-2)
Filter element, fluid (2)
Engine access door opened (TM 5-3800-205-10-1
or TM 5-3800-205-10-2)
O-ring (as required)
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Clean up all leaked or spilled fuel. Fuel may ignite, causing damage to machine and injury or
death to personnel.
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable containers before
opening any compartment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.
Tag all hoses and wires to aid in installation. Cap all hoses and fittings to prevent fluid loss and contam-
ination of fuel system.