TRANSMISSION OIL SUCTION SCREEN AND TUBE ASSEMBLY
(MAGNETIC SCREEN) REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Remove and discard O-ring (7) from cover assem-
Remove transmission oil suction screen (3) and tube
assembly (magnetic screen) (4) from transmission
Remove two screws (5) and spring washer (6) from
cover assembly (2).
CLEANING AND INSPECTION
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic
material. However, it may be irritating to the eyes and skin. The use of protective gloves and goggles is
suggested. Use in well-ventilated areas. Keep away from open flames and other sources of ignition.
Do NOT rap magnets on hard objects or damage to magnets may result.
Clean all removed components in cleaning compound and dry thoroughly.
Separate magnets from screen and clean. Use a clean rag or a stiff bristle brush.
If magnets are damaged, replace tube assembly (magnetic screen).
Replace any other damaged or worn component.