TM 5-3800-205-23-1
FINAL DRIVE MAINTENANCE - CONTINUED
0077 00
REMOVAL
1.
Remove two screws (1) and washers (2) from final drive (3) and wheel assembly. Install two guide bolts (4) into final
drive and wheel assembly.
2.
Install two chain link ends (5) and attach a nylon sling and suitable lifting device to final drive (3).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Final drive weighs 93 lb (42 kg).
3.
Remove 13 remaining screws (1) and washers (2) and use two forcing screws (6) to remove final drive (3) from wheel
assembly.
4.
Remove two forcing screws (6).
4
1,2
1,2
5
3
3
6
390-1203
1,2
4
DISASSEMBLY
1.
Remove retaining ring (7) from shaft (8).
390-537
8
7
0077 00-2