TM 5-3800-205-23-1
SKID STEER CONTROL AND AIR LINES REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Equipment Condition
Maintenance Level
Machine parked on hard, level surface (TM 5-3800-
Unit
205-10-1 or TM 5-3800-205-10-2)
Tools and Special Tools
Scraper bowl or water tank lowered to ground (TM
5-3800-205-10-1 or TM 5-3800-205-10-2)
Tool kit, general mechanic's (Item 33, WP 0172
Parking brake applied (TM 5-3800-205-10-1 or TM
5-3800-205-10-2)
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
3800-205-10-2)
Materials/Parts
Battery disconnect switch in OFF position (TM 5-
3800-205-10-1 or TM 5-3800-205-10-2)
Air tanks drained (TM 5-3800-205-10-1 or TM 5-
3800-205-10-2)
WARNING
Do NOT disconnect any air lines or fittings unless engine is shut down and air system pressure is
relieved. Failure to follow this warning could result in serious injury to personnel.
Always wear eye protection when disconnecting air lines. Residual air will be expelled. Failure to fol-
low this warning may result in serious eye injury.
CAUTION
Cap air lines and ports to prevent contamination of air system and parts.
NOTE
Tag all air lines prior to removal.
Remove retaining clamps as required and note location to ensure correct installation.