TM 5-3800-205-23-2
GROUND STRAPS REPLACEMENT
THIS WORK PACKAGE COVERS
Air Intake Heater-To-Engine Ground Strap Replacement, Starter Ground Cable Replacement, Cab-To-Frame Ground
Strap Replacement
INITIAL SETUP
Maintenance Level
Equipment Conditions
Machine parked on hard, level surface (TM 5-3800-
Unit
205-10-1)
Tools and Special Tools
Scraper bowl lowered to ground (TM 5-3800-204-
10-1)
Shop equipment, common no. 1 (Item 24, WP 0048
Parking brake engaged (TM 5-3800-205-10-1)
Wheels chocked (TM 5-3800-205-10-1)
Materials/Parts
Battery disconnect switch in OFF position (TM 5-
Lockwasher
3800-205-10-1)
AIR INTAKE HEATER-TO-ENGINE BLOCK GROUND STRAP REPLACEMENT
1.
Place battery disconnect switch in OFF position (TM 5-3800-205-10-1).
2.
Open engine access door (TM 5-3800-205-10-1).
3.
Remove two nuts (5), washers (4), and ground strap (3) from studs (6) on intake heater (2) and engine block (1).
NOTE
Ensure ground points are clean.
4.
Install ground strap (3) on studs (6) on intake heater (2) and engine block (1) with two washers (4) and nuts (5).
5.
Close engine access door (TM 5-3800-205-10-1).
6
390-1688
1
2
3
5,4