HYDRAULIC LINES AND FITTINGS REPLACEMENT - CONTINUED
HYDRAULIC HOSE INSTALLATION
Lubricate new O-rings with clean oil before installation.
Remove protective caps from tee (5) and hose (7). Install new O-ring (6) and connect hose to tee.
Remove protective caps from elbow (8) and hose (7). Install new O-ring (9) and connect hose to elbow.
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poisoning.
Start engine (TM 5-3800-205-10-1) and check for leaks.