FAN BELTS MAINTENANCE
THIS WORK PACKAGE COVERS
Removal, Inspection, Installation/Adjustment
Tools and Special Tools
Radiator fan shield assembly removed (WP 0045
Tool kit, general mechanic's (Item 113, WP 0338
Loosen nut (2) on eyebolt to remove tension from V-belt set on front, right side of tractor.
Remove V-belt set (1).
Inspect belts for cracking or wear. Replace as necessary.
Always replace V-belts as a complete set.
Install V-belt set (1) on belt tensioner arm.
Tighten nut (2) to adjust belt deflection to 9/16 in. (14 mm) under 25 lb-ft (34 Nm) force halfway between belt tensioner
END OF WORK PACKAGE