TM 5-3805-248-23-1
TRANSMISSION HOLD CONTROL VALVE ASSEMBLY MAINTENANCE - CONTINUED
0174 00
REMOVAL
CAUTION
Wipe area clean around all connections prior to removal. Cap lines and plug openings after removal. Con-
tamination of system could result in premature failure.
NOTE
Tag hose and tube assemblies prior to removal to ensure correct installation.
Note routing of all hose assemblies prior to removal to ensure correct installation.
Remove and note location of all clips that secure hose assemblies to ensure correct installation.
2
1.
Disconnect hose assembly (3) from under left side of
1
operator compartment.
2.
Remove connector (4).
3.
Disconnect hose assembly (5).
4.
Remove elbow (6).
5.
Disconnect tube assembly (2).
6.
Remove connector (1).
6
5
4
394-882
3
7.
Loosen nut (8) and bolt (7) and raise pedal.
8.
With assistance, support valve body assembly and remove boot (9), nut (10) and one of two washers (11).
9.
Remove valve body assembly from under operator compartment floor.
7
PEDAL
8
9
10
11
VALVE
BODY ASSEMBLY
394-883
0174 00-2