CONTROL GROUP PRESSURE TEST - CONTINUED
TESTING - CONTINUED
Install transmission hydraulic test set.
Connect 0-200 psi pressure gage to tap A.
Use locking pliers to shift manual selector shaft into REVERSE.
Rotate hand lever to increase engine speed on transmission hydraulic test, set tachometer to 750 RPM and record pres-
sure reading on pressure gage for tap A.
Remove bolt G.
Connect 0-150 psi pressure gage to pressure tap C.
Use locking pliers to shift manual selector shaft into NEUTRAL and record pressure reading on pressure gage for tap C.
Install bolt G.
Remove bolt H.
Connect 0-600 psi pressure gage to pressure tap B and record pressure reading on pressure gage for tap B.