CYLINDER BLOCK REPAIR - CONTINUED
ASSEMBLY - CONTINUED
Do not immerse filler band in oil until proper cylinder liner is selected and ready for installation. Filler band
must not be immersed for more than 30 seconds and must be installed on cylinder liner and in bore immedi-
ately. Failure to follow this procedure could result in damage to equipment.
Use clean lubricating oil to immerse filler band (42)
for 30 seconds.
Install filler band (42) on cylinder liner (39).
Use match-marks to position cylinder liner (39)
assembly in proper cylinder bore.
Use liner installation tool to install cylinder liner (39)
assembly to full depth in bore.