TM 5-3805-260-24
35. Install pins (65), the four disc assemblies (64) and three
plates (66). Start with a disc assembly.
36. Put ring (60) under compression to install gear (67).
37. Use a hammer and punch and install pins (68) to hold the
ends of the ring apart inside gear (67).
38. Install springs (71).
39. If necessary, make a replacement of dowels (70) in No. 2
clutch housing (69) so they extend to the same height as
the original dowels.
40. Install No. 2 clutch housing (69) and piston. Make sure
springs (71 ) engage in the holes in the No. 2 clutch
housing.
41. Install ring gear (74), the five disc assemblies (72) and four
plates (73). Start with a disc assembly.
3-209