CONNECTION OF TRACTOR AND SCRAPER
Remove tooling (D) from under the draft frame.
Put lines (10) in position and install the three
clamps that hold the lines under the draft frame.
Install the bolts in the two clamps on the right
side of the draft frame.
Connect three hoses (11) on the right side of the
Connect hose (12) to the hitch.
Connect hoses (13) on side of draft frame.
Connect fuel line (15), hose (16) and electrical
Connect hose (17) to the angle.
Connect hoses (20) on side of hitch.
Put steering pins (19) in the bores and install
covers (18) and the bolts to hold the pins.
Fill hydraulic tank, start engine and operate
hydraulic controls to remove air from hydraulic
system. Stop the engine and check the oil level
in the hydraulic tank.
Install pin and locking pin in the parking brake.
Remove blocks from scraper wheels.