REMOVE DRAFT FRAME
separation of tractor and scraper
NOTE: Put caps and identification on the lines as to their
location for installation.
Disconnect hoses (1), (2) and (3) on the left side
of the bowl.
Disconnect hoses (4), (5) and (6) from the bowl
lift cylinders on both sides.
Fasten a hoist to the bowl lift cylinders and
remove bolts, bar (7) and pin (8) that hold both
bowl lift cylinders. Lower the cylinders to the
Disconnect four hoses (9) (one hose can not be
seen) on the right side of the draft frame.
Remove bolts (12) from support assembly (10).
Remove bands that hold fuel line and electrical
cable (11) to the draft frame.