SLIDING FLOOR CYLINDER
DISASSEMBLE SLIDING FLOOR
Hydraulic Cylinder Repair Stand
remove sliding floor cylinder
Fasten a hoist to the cylinder and put it in
position on tooling (A) with the openings for the
hydraulic lines down and the rod extended to the
Remove four bolts (1) from the head of the
Remove rod (2),head and piston from the
Remove the nut from the rod with tooling (B).
Remove piston (3) and head (4) from the rod.
Remove ring (5) and seal assembly (6) from
Remove bolts (7) from retainer (8). Remove the
retainer and the shims. Keep the shims together
Remove seal (9) from the retainer.
Remove packing (10) from head (11).