Figure 2-32. Release Tether for Purging MCU.

MWO 5-2350-262-35-2

NOTE

Step 4 below applies to Figure 2-32.

4. Connect release tether (2) to MCU (1).

Figure 2-32. Release Tether for Purging MCU.

NOTE

Steps 5 and 7 below apply to Figure 2-33.

Solution will flow out into FILLED bottle. When flow stops, purging is complete.

5. Loosen cap (3) on FILLED bottle (4) to allow for purging.

6. Operate hand pump (5) to purge MCU (1).

Figure 2-33. Purging MCU and Hand Pump.

7. Disconnect MCU (1) from release tether (2).

2-24