TM 5-2350-262-20-3
FRONT CORNER (LEFT OR RIGHT) RAISES IN UNSPRUNG, BUT NOT SPRUNG MODE
8
(CONTINUED)
1
Perform No. 1 actuator oil flow and hydraulic pressure
test.
Does oil flow freely?
YES
NO
2
Close globe valve and check hydraulic pressure.
Is hydraulic pressure greater than 2,500 psi (17,238 kPa)?
To block 15
YES
NO
3
Check for blockage at port 9.
Is port 9 blocked?
To block 15
YES
NO
4
Clear blockage.
Remove all test equipment and connect hoses.
Verify problem is solved.
5
Check if front corner will raise when front suspension control valve is actuated.
Will front corner raise?
NO
YES
To block 6
To block 9
3-112
