TM 5-2350-262-20-3
NO. 1 RIGHT
ACTUATOR DEPICTED
RAISE FRONT CORNER TEST
NOTE
Have suitable container ready to catch oil.
Disconnect SPNSN UNIT-2 hose (1) from port 2 on No. 1 actuator (2). Cap and plug port
2 and SPNSN UNIT-2 hose (1).
Start engine. Move SPRUNG/UNSPRUNG lever to SPRUNG mode.
Stop engine; relieve hydraulic pressure and connect hoses.
Notify Direct Support maintenance.
Notify Direct Support maintenance.
NO. 1 RIGHT
ACTUATOR DEPICTED
FRONT ACTUATOR PRESSURE TEST
NOTE
Have suitable container ready to catch oil.
Stop engine; relieve hydraulic pressure. Remove all test equipment and connect lines.
Disconnect NO 1 SPNSN UNIT-11 hose (1) from port 11 on No. 1 actuator (2). Cap port
11.
Connect tee (3) and pressure measuring device (4) to NO 1 SPNSN UNIT-11 hose (1).
Cap tee (3).
Start engine Move SPRUNG/UNSPRUNG lever to UNSPRUNG mode. Read pressure
measuring device (4).
Stop engine; relieve hydraulic pressure. Remove all test equipment and connect hose.
3-115
