TM 5-2320-262-20-3
10
HYDRAULIC OIL OVERHEATS
WARNING
High pressure is present in the M9 hydraulic system. Do not disconnect any hydraulic
system component unless hydraulic system pressure has been relieved. Ensure each
hydraulic control lever is moved several times through all positions and hydraulic tank
dipstick is slowly loosened to relieve pressure. Failure to comply may result in severe
injury or death to personnel.
COMPONENTS:
1.
RETURN LINE FILTER
2.
MAIN ACCUMULATOR
3.
HIGH-PRESSURE FILTERS
4.
EJECTOR CYLINDER
1
5.
DIRECTION CONTROL
VALVE BANK
2
6.
WINCH MOTOR
6
27
4
3
7.
SPRUNG/UNSPRUNG
VALVE
5
8.
APRON CYLINDER
8
9.
BILGE PUMP MOTOR
26
10.
HYDRAULIC RESERVOIR
25
11.
NO. 4 ACTUATOR, LEFT
HAND
24
12.
NO. 3 ACTUATOR, LEFT
7
8
HAND
9
13.
SUSPENSION RELIEF
23
VALVE (BEHIND)
22
10
14.
NO. 2 ACTUATOR, LEFT
HAND
15.
INTERMEDIATE WHEEL
VALVE
11
19
16.
NO. 1 ACTUTUATOR,
LEFT HAND
12
21 20
17.
BUMP STOP CYLINDERS
18.
FORWARD MANIFOLDS
17
13
19.
CHECK VALVE
18
14
20.
MAIN MANIFOLD, LEFT HAND
15
21.
FORWARD MANIFOLDS,
RIGHT HAND
15
16
22.
NO. 1 ACTUATOR, RIGHT HAND
17
23.
NO. 2 ACTUATOR, RIGHT HAND
24.
COMPENSATING PUMP
25.
NO. 3 ACTUATOR, RIGHT HAND
26.
MAIN HYDRAULIC PUMP
27.
NO. 4 ACTUATOR, RIGHT HAND
HYDRAULIC CIRCUIT
