TM5-2350-262-20-3
14
RIGHT REAR CORNER RAISES UNSPRUNG, BUT NOT SPRUNG MODE
Hydraulic pressure to No. 4 right actuator is provided by compensating pump through right-hand manifold by way
of circuit 9.
WARNING
High pressure is present in the M9 hydraulic system. Do not disconnect any hydraulic
system component unless hydraulic system pressure has been relieved. Ensure each
hydraulic control lever is moved several times through all positions and hydraulic tank
dipstick is slowly loosened to relieve pressure. Failure to comply may result in severe
injury or death to personnel.
HIGH-PRESSURE
CIRCUIT
1
3
2
RETURN
SUPPLY
4
5
18
COMPONENTS:
6
1. RETURN LINE FILTER
17
2. MAIN ACCUMULATOR
16
3. HIGH-PRESSURE FILTERS
4. DIRECTIONAL CONTROL VALVE
BANK
15
5. SPRUNG/UNSPRUNG VALVE
6. NO. 4 ACTUATOR,LEFT HAND
14
7
7. HYDRAULIC RESERVOIR
8. NO. 3 ACTUATOR,LEFT HAND
9. NO. 2 ACTUATOR,LEFT HAND
10. NO. 1 ACTUATOR,LEFT HAND
8
11. BUMP STOP CYLINDERS
12
12. COMPENSATING PUMP
9
13. CHECK VALVE
14. NO. 1 ACTUATOR,RIGHT HAND
13
11
15. NO. 2 ACTUATOR,RIGHT HAND
10
16. NO. 3 ACTUATOR,RIGHT HAND
17. MAIN HYDRAULIC PUMP
11
18. NO. 4 ACTUATOR,RIGHT HAND
REAR SUSPENSION RAISE/LOWER CIRCUIT
