TM 5-2350-262-20-3
16
WINCH AND RIGHT-HAND WHEEL CONTROL INOPERATIVE
The outboard valve bank hydraulic system 13L circuit is supplied by hydraulic pump port 13L and pressure is
controlled by the relief valve at inlet port 13L.
NOTE
Perform this procedure only when the winch and right-hand suspension controls are
inoperative.
WARNING
High pressure is present in the M9 hydraulic system. Do not disconnect any hydraulic
system component unless hydraulic system pressure has been relieved. Ensure each
hydraulic control lever is moved several times through all positions and hydraulic tank
dipstick is slowly loosened to relieve pressure. Failure to comply may result in severe
injury or death to personnel.
3
HIGH-PRESSURE
CIRCUIT
4
RETURN
SUPPLY
5
6
2
1
COMPONENTS:
1. NO. 1 ACTUATOR,
7
RIGHT HAND
2. MAIN HYDRAULIC PUMP
3. RETURN LINE FILTER
4. HIGH-PRESSURE FILTERS
5. DIRECTIONAL CONTROL
8
VALVE BANK
6. WINCH MOTOR
7. HYDRAULIC RESERVOIR
8. MAIN MANIFOLD, RIGHT
HAND
OUTBOARD HYDRAULIC VALVE BANK CIRCUIT
