TM 5-2350-262-20-3
PORT VB
5
6
WINCH CONTROL VALVE HYDRAULIC PRESSURE CHECK
WARNING
Do not operate ejector when personnel are in bowl. Do not work in
bowl unless ejector lock is engaged. Failure to comply may result
in severe injury or death to personnel.
Start vehicle engine and move ejector forward. Stop engine and relieve hydraulic
pressure.
Engage ejector lock (6).
NOTE
Have suitable container ready to catch oil.
Disconnect CONT VLV-VB hose (1) from winch control valve (2). Plug CONT VLV-VB
hose (1). Connect pressure measuring device (3) to elbow (4) on port VB of winch control
valve.
Have assistant start vehicle engine and hold WINCH CONTROL lever (5) in PAY IN
position. Read pressure measuring device (3).
Return winch control lever (5) to NEUTRAL position.
Change 2
3-219
