TM 5-2350-377-13&P
0003
TRACKS AND ROADWHEELS
The tracks (Figure 2), drive sprockets, and roadwheels (Figure 2) are of conventional design. Track tension is
adjusted with cylinders attached to the adjusting flanges of the final drive units. The track tension is controlled by a
control lever in the operator's compartment.
TRACKS
ROADWHEELS
G0005HBF
Figure 2. Tracks and Roadwheels.
EARTHMOVING COMPONENTS
APRON AND DOZER ASSEMBLY
The apron and dozer assembly (Figure 3) is raised or lowered by the two apron cylinders, one on each side of the
vehicle. These cylinders are controlled by a control lever in the operator's compartment. The dozer blade can be
folded and unfolded by a control lever in the operator's compartment.
APRON AND
DOZER ASSEMBLY
G0006HBF
Figure 3.
Apron and Dozer Assembly.
03/15/2011Rel(1.8)root(thrywp)wpno(G00003)