TM 5-2350-377-13&P
0016
HYDRAULIC INSTALLATION - Continued
STEP
3.
Check hose for blockage.
NOTE
Have suitable container ready to catch oil.
a.
Disconnect HYDR-MAN-IN-9 hose (Figure 2, Item 2) from tee (Figure 2, Item 1) at port 9
(Figure 2, Item 4) on LHMAN (Figure 2, Item 5). Plug pressure hose (Figure 2, Item 2). Add short hose
(Figure 2, Item 3) to tee (Figure 2, Item 1).
b.
While holding open end of hose (Figure 2, Item 3) in suitable container, have assistant start engine.
Check for free flow of hydraulic oil from hose (Figure 2, Item 3).
c.
Stop engine; relieve hydraulic pressure. Disconnect hose (Figure 2, Item 3) from tee (Figure 2, Item 1)
and connect HYDR-MAN-IN-9 hose (Figure 2, Item 2) to tee (Figure 2, Item 1).
2
1
3
5
4
T00802HBF
Figure 2.
Hose Test.
CONDITION/INDICATION
Is hose blocked?
DECISION
YES - Clear blockage or replace hose (WP 0042). Verify problem is solved.
NO - Verify problem with operator.
END OF WORK PACKAGE