TM 5-3800-205-10-1
Table 1. Preventive Maintenance Checks and
Services (PMCS) for 613CS Scraper - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
NOTE
86
Monthly
All Systems--
(Con't)
Machine
If temperature is below 32F (0C), operate controls prior to
Exercise
moving machine.
c. After machine has idled for five
minutes, begin to operate all con-
trols slowly:
(1) transmission in all
ranges
including reverse;
(2) differential lock engaged and
disengaged;
(3) parking and service brakes
applied and released;
(4) steering from full left to full
right; and
(5) all scraper hydraulic controls
(bowl, ejector, floor, and eleva-
tor circuits).
d. Operate controls for another five
minutes.
e. Move machine and operate all con-
trols through full motion, to bring
all systems to operating tempera-
ture.
f. Move machine and continue to
operate all controls through full
motion for 30 minutes after
machine systems have reached
operating temperature.
g. Stop machine and allow to idle for
five minutes.
h. Shut down engine.
i. Perform After operation PMCS.
0014 00-64
