TM 5-3800-205-10-1
AIR TRANSPORT BY C-130 AIRCRAFT - CONTINUED
0018 00
RETURN MACHINE TO OPERATIONAL CONFIGURATION - CONTINUED
g.
four steering cylinder locking collar assemblies, two short (6 5/8 in.) and two long (10 3/4 in.);
h.
exhaust extension; and
i.
toolbox.
STEERING CYLINDER
LOCKING COLLAR
ASSEMBLIES
EXHAUST
EXTENSION
RAMPS
TRAY
RETAINING
PIN
390-1119
TOOLBOX
Table 5. Stowage Instructions for ISU-60 Container - Single-Door End.
COMPONENT
STOWAGE INSTRUCTIONS
1.
Place steering cylinder locking collar assemblies in two right cutouts in cushion
Steering Cylinder
pad, on left side of shelf.
Locking Collar Assem-
2.
Place exhaust extension in left cutout in cushion pad, on left side of shelf.
blies and Exhaust
3.
Secure with three straps.
Extension
Toolbox
1.
Place toolbox on front edge of tray.
2.
Secure with three straps.
3.
Slide tray all the way in.
4.
Secure tray with two pins through tray and container floor.
Ramps
1.
Position each ramp against right wall of container.
2.
Secure each ramp with strap.
CAUTION
Check to ensure all components are securely fastened prior to closing and
securing door. Failure to do so may result in damage to equipment.
END OF WORK PACKAGE
0018 00-62
