TM 5-3800-205-10-1
AIRDROP BY C-130 AIRCRAFT - CONTINUED
0019 00
CONFIGURE MACHINE FOR AIR TRANSPORT - CONTINUED
WARNING
Do NOT enter or stand in bowl or on elevator flights. Flights may move if stepped on. Failure to follow this
warning may result in injury to personnel.
j.
Move ejector forward and pin elevator links to rear wall of ejector:
(1)
Remove nut, bolt, and washer and remove link from attachment to each side of elevator. Reinstall mount-
ing hardware on elevator.
BOLT, WASHER,
ELEVATOR
AND NUT
LINK
LINK
(2)
From rearmost ejector position, measure 31 3/4 in. (80.6 cm) forward and mark location on wall of bowl.
(3)
Remove ladder out of the way, clear of scraper bowl.
WARNING
Scraper floor and floor rollers are in motion when ejector is in motion. Stand clear of scraper bowl to avoid
injury to personnel.
(4)
Start engine and operate ejector forward until ejector is even with mark and links can be pinned through
lugs on ejector rear wall.
0019 00-14
