TM 5-3800-205-10-1
AIRDROP BY C-130 AIRCRAFT - CONTINUED
0019 00
CONFIGURE MACHINE FOR AIRDROP - CONTINUED
12.
On right side of draft frame, perform the following steps:
a.
Remove bolt, washer, clamp, and release electrical harness.
b.
Remove bolt, washer, and clip.
c.
Disconnect 12-pin electrical connectors from each other.
12-PIN CONNECTORS
CLIP
12-PIN CONNECTOR
390-994
d.
Disconnect air hose at quick disconnect fitting.
e.
Disconnect two fuel hoses at quick disconnect fittings.
f.
Disconnect two hydraulic hoses at quick disconnect fittings.
g.
Place disconnected electrical harness, air hose, fuel hoses, and hydraulic hoses down inside bowl. Ensure all dust
caps are installed.
HYDRAULIC
HOSES
FUEL HOSES
AIR HOSE
ELECTRICAL
HARNESS
DUST CAP
DUST CAPS
390-1120
0019 00-19